Command: ninja flash
[1/5] cd /home/tonio/Workspace/perso/esp/bme680-demo/build && /home/tonio/.espressif/python_env/idf6.2_py3.14_env/bin/python /home/tonio/esp/esp-idf/components/partition_table/check_sizes.py --offset 0x8000 partition --type app /home/tonio/Workspace/perso/esp/bme680-demo/build/partition_table/partition-table.bin /home/tonio/Workspace/perso/esp/bme680-demo/build/bme680-demo.bin
bme680-demo.bin binary size 0x2b540 bytes. Smallest app partition is 0x100000 bytes. 0xd4ac0 bytes (83%) free.
[2/5] Performing build step for 'bootloader'
[1/1] cd /home/tonio/Workspace/perso/esp/bme680-demo/build/bootloader && /home/tonio/.espressif/python_env/idf6.2_py3.14_env/bin/python /home/tonio/esp/esp-idf/components/partition_table/check_sizes.py --offset 0x8000 bootloader 0x1000 /home/tonio/Workspace/perso/esp/bme680-demo/build/bootloader/bootloader.bin
Bootloader binary size 0x6570 bytes. 0xa90 bytes (9%) free.
[3/5] No install step for 'bootloader'
[4/5] Completed 'bootloader'
[4/5] Running utility command for flash
esptool --chip esp32 -p /dev/ttyUSB0 -b 460800 --before=default-reset --after=hard-reset write-flash --flash-mode dio --flash-freq 40m --flash-size 4MB 0x1000 bootloader/bootloader.bin 0x8000 partition_table/partition-table.bin 0x10000 bme680-demo.bin --diff-with bootloader/bootloader_flashed.bin partition_table/partition-table_flashed.bin bme680-demo_flashed.bin
esptool v5.3.0
Serial port /dev/ttyUSB0:
Connecting...........
Connected to ESP32 on /dev/ttyUSB0:
Chip type:          ESP32-D0WD-V3 (revision v3.1)
Features:           Wi-Fi, BT, Dual Core + LP Core, 240MHz, Vref calibration in eFuse, Coding Scheme None
Crystal frequency:  40MHz
MAC:                78:1c:3c:b8:b9:50

Uploading stub flasher...
Running stub flasher...
Stub flasher running.
Changing baud rate to 460800...
Changed.

Configuring flash size...

Writing 'bootloader/bootloader.bin' at 0x00001000...
SHA digest in image updated.
SHA digest in image updated.
No changed sectors found, verifying if data is in flash...
'bootloader/bootloader.bin' at 0x00001000 verified.

Writing 'partition_table/partition-table.bin' at 0x00008000...
No changed sectors found, verifying if data is in flash...
'partition_table/partition-table.bin' at 0x00008000 verified.

Writing 'bme680-demo.bin' at 0x00010000...
No changed sectors found, verifying if data is in flash...
'bme680-demo.bin' at 0x00010000 verified.

Hard resetting via RTS pin...