18 KiB
18 KiB
Command: /home/tonio/.espressif/python_env/idf6.2_py3.14_env/bin/python /home/tonio/esp/esp-idf/tools/idf_monitor.py -p /dev/ttyUSB0 -b 115200 --toolchain-prefix xtensa-esp32-elf- --target esp32 --revision 0 /home/tonio/Workspace/perso/esp/bme680-demo/build/bme680-demo.elf /home/tonio/Workspace/perso/esp/bme680-demo/build/bootloader/bootloader.elf -m '/home/tonio/.espressif/python_env/idf6.2_py3.14_env/bin/python' '/home/tonio/esp/esp-idf/tools/idf.py' '-p' '/dev/ttyUSB0'
66) boot: Loaded app from partition at offset 0x10000
I (166) boot: Disabling RNG early entropy sourc<72>ets Jul 29 2019 12:21:46
rst:0x1 (POWERON_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DIO, clock div:2
load:0x3fff0040,len:6292
load:0x40078000,len:15684
load:0x40080400,len:3904
entry 0x4008061c
I (27) boot: ESP-IDF v6.1-dev-5769-gfb14a3e7f4 2nd stage bootloader
I (27) boot: compile time Jun 23 2026 23:00:54
I (28) boot: Multicore bootloader
I (30) boot: chip revision: v3.1
I (33) boot.esp32: SPI Speed : 40MHz
I (37) boot.esp32: SPI Mode : DIO
I (40) boot.esp32: SPI Flash Size : 4MB
I (44) boot: Enabling RNG early entropy source...
I (49) boot: Partition Table:
I (51) boot: ## Label Usage Type ST Offset Length
I (57) boot: 0 nvs WiFi data 01 02 00009000 00006000
I (64) boot: 1 phy_init RF data 01 01 0000f000 00001000
I (71) boot: 2 factory factory app 00 00 00010000 00100000
I (77) boot: End of partition table
I (80) esp_image: segment 0: paddr=00010020 vaddr=3f400020 size=0b26ch ( 45676) map
I (105) esp_image: segment 1: paddr=0001b294 vaddr=3ffb0000 size=02ba8h ( 11176) load
I (110) esp_image: segment 2: paddr=0001de44 vaddr=40080000 size=021d4h ( 8660) load
I (114) esp_image: segment 3: paddr=00020020 vaddr=400d0020 size=12578h ( 75128) map
I (144) esp_image: segment 4: paddr=000325a0 vaddr=400821d4 size=08f40h ( 36672) load
I (160) esp_image: segment 5: paddr=0003b4e8 vaddr=50000000 size=00028h ( 40) load
I (166) boot: Loaded app from partition at offset 0x10000
I (166) boot: Disabling RNG early entropy source...
I (178) cpu_start: Multicore app
I (186) cpu_start: GPIO 3 and 1 are used as console UART I/O pins
I (187) cpu_start: Pro cpu start user code
I (187) cpu_start: cpu freq: 160000000 Hz
I (189) app_init: Application information:
I (192) app_init: Project name: bme680-demo
I (197) app_init: App version: 1
I (200) app_init: Compile time: Jun 23 2026 23:00:20
I (205) app_init: ELF file SHA256: cf6ca9352...
I (209) app_init: ESP-IDF: v6.1-dev-5769-gfb14a3e7f4
I (215) efuse_init: Min chip rev: v0.0
I (219) efuse_init: Max chip rev: v3.99
I (223) efuse_init: Chip rev: v3.1
I (227) heap_init: Initializing. RAM available for dynamic allocation:
I (233) heap_init: At 3FFAE6E0 len 00001920 (6 KiB): DRAM
I (238) heap_init: At 3FFB36B0 len 0002C950 (178 KiB): DRAM
I (243) heap_init: At 3FFE0440 len 00003AE0 (14 KiB): D/IRAM
I (249) heap_init: At 3FFE4350 len 0001BCB0 (111 KiB): D/IRAM
I (254) heap_init: At 4008B114 len 00014EEC (83 KiB): IRAM
I (261) spi_flash: detected chip: generic
I (263) spi_flash: flash io: dio
I (267) main_task: Started on CPU0
I (267) main_task: Calling app_main()
I (267) i2cdev: [Port 0] First initialization. Configuring bus with SDA=21, SCL=22 (Pullups SCL:0 SDA:0)
I (277) i2cdev: [Port 0] Successfully installed I2C master bus (Handle: 0x3ffb566c).
I (287) i2cdev: [0x76 at 0] Device added successfully (Device Handle: 0x3ffaffc8, Speed: 100000 Hz).
W (297) i2c.common: GPIO 21 is not usable, maybe conflict with others
W (297) i2c.common: GPIO 22 is not usable, maybe conflict with others
E (1307) i2c.master: I2C software timeout
W (1307) i2cdev: [0x76 at 0] I2C op failed (Try 0, Handle 0x3ffaffc8): 264 (ESP_ERR_INVALID_RESPONSE).
W (1347) i2cdev: [0x76 at 0] Retrying operation...
W (1347) i2c.common: GPIO 21 is not usable, maybe conflict with others
W (1347) i2c.common: GPIO 22 is not usable, maybe conflict with others
E (2347) i2c.master: I2C software timeout
W (2347) i2cdev: [0x76 at 0] I2C op failed (Try 1, Handle 0x3ffaffc8): 264 (ESP_ERR_INVALID_RESPONSE).
W (2427) i2cdev: [0x76 at 0] Retrying operation...
W (2427) i2c.common: GPIO 21 is not usable, maybe conflict with others
W (2427) i2c.common: GPIO 22 is not usable, maybe conflict with others
E (3427) i2c.master: I2C software timeout
W (3427) i2cdev: [0x76 at 0] I2C op failed (Try 2, Handle 0x3ffaffc8): 264 (ESP_ERR_INVALID_RESPONSE).
W (3587) i2cdev: [0x76 at 0] Retrying operation...
W (3587) i2c.common: GPIO 21 is not usable, maybe conflict with others
W (3587) i2c.common: GPIO 22 is not usable, maybe conflict with others
E (4587) i2c.master: I2C software timeout
W (4587) i2cdev: [0x76 at 0] I2C op failed (Try 3, Handle 0x3ffaffc8): 264 (ESP_ERR_INVALID_RESPONSE).
E (4587) i2cdev: [0x76 at 0] I2C operation failed after 4 retries. Last error: 264 (ESP_ERR_INVALID_RESPONSE)
E (4597) bme680-demo: BME680 init failed on SDA=21 SCL=22 addr=0x76: ESP_ERR_INVALID_RESPONSE. Retrying in 2000 ms
I (6607) i2cdev: [0x76 at 0] Device added successfully (Device Handle: 0x3ffaffc8, Speed: 100000 Hz).
W (6607) i2c.common: GPIO 21 is not usable, maybe conflict with others
W (6607) i2c.common: GPIO 22 is not usable, maybe conflict with others
I (6637) bme680-demo: Sensor initialized on I2C port 0, SDA=21, SCL=22, address=0x76
W (6817) bme680: Heater is not stable
I (6817) bme680-demo: Temp: 33.48 C Humidity: 56.71 % Pressure: 1014.18 hPa Gas: 0 ohm
I (9997) bme680-demo: Temp: 33.50 C Humidity: 57.12 % Pressure: 1014.20 hPa Gas: 5412 ohm
I (13177) bme680-demo: Temp: 33.53 C Humidity: 57.65 % Pressure: 1014.20 hPa Gas: 6300 ohm
I (16357) bme680-demo: Temp: 33.54 C Humidity: 55.33 % Pressure: 1014.20 hPa Gas: 7493 ohm
I (19537) bme680-demo: Temp: 33.56 C Humidity: 52.27 % Pressure: 1014.20 hPa Gas: 8784 ohm
I (22717) bme680-demo: Temp: 33.58 C Humidity: 50.32 % Pressure: 1014.20 hPa Gas: 10081 ohm
I (25897) bme680-demo: Temp: 33.59 C Humidity: 49.17 % Pressure: 1014.24 hPa Gas: 11230 ohm
I (29077) bme680-demo: Temp: 33.61 C Humidity: 49.93 % Pressure: 1014.24 hPa Gas: 12462 ohm
I (32257) bme680-demo: Temp: 33.63 C Humidity: 49.71 % Pressure: 1014.24 hPa Gas: 13875 ohm
I (35437) bme680-demo: Temp: 33.64 C Humidity: 48.52 % Pressure: 1014.24 hPa Gas: 15260 ohm
W (38437) i2c.common: GPIO 21 is not usable, maybe conflict with others
W (38437) i2c.common: GPIO 22 is not usable, maybe conflict with others
E (38437) i2c.master: I2C hardware timeout detected
W (38437) i2cdev: [0x76 at 0] I2C op failed (Try 0, Handle 0x3ffaffc8): 264 (ESP_ERR_INVALID_RESPONSE).
W (38487) i2cdev: [0x76 at 0] Retrying operation...
W (38487) i2c.common: GPIO 21 is not usable, maybe conflict with others
W (38487) i2c.common: GPIO 22 is not usable, maybe conflict with others
W (38767) i2c.common: GPIO 21 is not usable, maybe conflict with others
W (38767) i2c.common: GPIO 22 is not usable, maybe conflict with others
E (38767) i2c.master: I2C hardware timeout detected
W (38767) i2cdev: [0x76 at 0] I2C op failed (Try 1, Handle 0x3ffaffc8): 264 (ESP_ERR_INVALID_RESPONSE).
W (38857) i2cdev: [0x76 at 0] Retrying operation...
W (38857) i2c.common: GPIO 21 is not usable, maybe conflict with others
W (38857) i2c.common: GPIO 22 is not usable, maybe conflict with others
W (38857) i2c.common: GPIO 21 is not usable, maybe conflict with others
W (38867) i2c.common: GPIO 22 is not usable, maybe conflict with others
E (38867) i2c.master: I2C hardware timeout detected
W (38877) i2cdev: [0x76 at 0] I2C op failed (Try 2, Handle 0x3ffaffc8): 264 (ESP_ERR_INVALID_RESPONSE).
W (39047) i2cdev: [0x76 at 0] Retrying operation...
W (39047) i2c.common: GPIO 21 is not usable, maybe conflict with others
W (39047) i2c.common: GPIO 22 is not usable, maybe conflict with others
E (40047) i2c.master: I2C software timeout
W (40047) i2cdev: [0x76 at 0] I2C op failed (Try 3, Handle 0x3ffaffc8): 264 (ESP_ERR_INVALID_RESPONSE).
E (40047) i2cdev: [0x76 at 0] I2C operation failed after 4 retries. Last error: 264 (ESP_ERR_INVALID_RESPONSE)
E (40057) bme680: Could not set forced mode to start TPHG measurement cycle
E (40057) bme680-demo: BME680 read failed: ESP_ERR_INVALID_RESPONSE
W (43067) i2c.common: GPIO 21 is not usable, maybe conflict with others
W (43067) i2c.common: GPIO 22 is not usable, maybe conflict with others
W (43657) i2c.common: GPIO 21 is not usable, maybe conflict with others
W (43657) i2c.common: GPIO 22 is not usable, maybe conflict with others
E (43657) i2c.master: I2C hardware timeout detected
W (43667) i2cdev: [0x76 at 0] I2C op failed (Try 0, Handle 0x3ffaffc8): 264 (ESP_ERR_INVALID_RESPONSE).
W (43717) i2cdev: [0x76 at 0] Retrying operation...
W (43717) i2c.common: GPIO 21 is not usable, maybe conflict with others
W (43717) i2c.common: GPIO 22 is not usable, maybe conflict with others
W (43717) i2c.common: GPIO 21 is not usable, maybe conflict with others
W (43727) i2c.common: GPIO 22 is not usable, maybe conflict with others
E (43727) i2c.master: I2C hardware timeout detected
W (43737) i2cdev: [0x76 at 0] I2C op failed (Try 1, Handle 0x3ffaffc8): 264 (ESP_ERR_INVALID_RESPONSE).
W (43827) i2cdev: [0x76 at 0] Retrying operation...
W (43827) i2c.common: GPIO 21 is not usable, maybe conflict with others
W (43827) i2c.common: GPIO 22 is not usable, maybe conflict with others
E (44827) i2c.master: I2C software timeout
W (44827) i2cdev: [0x76 at 0] I2C op failed (Try 2, Handle 0x3ffaffc8): 264 (ESP_ERR_INVALID_RESPONSE).
W (44987) i2cdev: [0x76 at 0] Retrying operation...
W (44987) i2c.common: GPIO 21 is not usable, maybe conflict with others
W (44987) i2c.common: GPIO 22 is not usable, maybe conflict with others
W (46147) i2c.common: GPIO 21 is not usable, maybe conflict with others
W (46147) i2c.common: GPIO 22 is not usable, maybe conflict with others
E (46147) i2c.master: I2C hardware timeout detected
W (46147) i2cdev: [0x76 at 0] I2C op failed (Try 0, Handle 0x3ffaffc8): 264 (ESP_ERR_INVALID_RESPONSE).
W (46197) i2cdev: [0x76 at 0] Retrying operation...
W (46197) i2c.common: GPIO 21 is not usable, maybe conflict with others
W (46197) i2c.common: GPIO 22 is not usable, maybe conflict with others
W (46197) bme680: Gas data is not valid
I (46197) bme680-demo: Temp: 33.83 C Humidity: 100.00 % Pressure: 657.77 hPa Gas: 0 ohm
W (49387) bme680: Gas data is not valid
I (49387) bme680-demo: Temp: 33.83 C Humidity: 100.00 % Pressure: 657.77 hPa Gas: 0 ohm
W (52567) bme680: Gas data is not valid
I (52567) bme680-demo: Temp: 33.83 C Humidity: 100.00 % Pressure: 657.77 hPa Gas: 0 ohm
W (55747) bme680: Gas data is not valid
I (55747) bme680-demo: Temp: 33.83 C Humidity: 100.00 % Pressure: 657.77 hPa Gas: 0 ohm
W (58747) i2c.common: GPIO 21 is not usable, maybe conflict with others
W (58747) i2c.common: GPIO 22 is not usable, maybe conflict with others
W (59137) i2c.common: GPIO 21 is not usable, maybe conflict with others
W (59137) i2c.common: GPIO 22 is not usable, maybe conflict with others
E (59137) i2c.master: I2C hardware timeout detected
W (59147) i2cdev: [0x76 at 0] I2C op failed (Try 0, Handle 0x3ffaffc8): 264 (ESP_ERR_INVALID_RESPONSE).
W (59187) i2cdev: [0x76 at 0] Retrying operation...
W (59187) i2c.common: GPIO 21 is not usable, maybe conflict with others
W (59187) i2c.common: GPIO 22 is not usable, maybe conflict with others
E (60187) i2c.master: I2C software timeout
W (60187) i2cdev: [0x76 at 0] I2C op failed (Try 1, Handle 0x3ffaffc8): 264 (ESP_ERR_INVALID_RESPONSE).
W (60267) i2cdev: [0x76 at 0] Retrying operation...
W (60267) i2c.common: GPIO 21 is not usable, maybe conflict with others
W (60267) i2c.common: GPIO 22 is not usable, maybe conflict with others
E (61267) i2c.master: I2C software timeout
W (61267) i2cdev: [0x76 at 0] I2C op failed (Try 2, Handle 0x3ffaffc8): 264 (ESP_ERR_INVALID_RESPONSE).
W (61427) i2cdev: [0x76 at 0] Retrying operation...
W (61427) i2c.common: GPIO 21 is not usable, maybe conflict with others
W (61427) i2c.common: GPIO 22 is not usable, maybe conflict with others
E (62427) i2c.master: I2C software timeout
W (62427) i2cdev: [0x76 at 0] I2C op failed (Try 3, Handle 0x3ffaffc8): 264 (ESP_ERR_INVALID_RESPONSE).
E (62427) i2cdev: [0x76 at 0] I2C operation failed after 4 retries. Last error: 264 (ESP_ERR_INVALID_RESPONSE)
E (62437) bme680: Could not set forced mode to start TPHG measurement cycle
E (62437) bme680-demo: BME680 read failed: ESP_ERR_INVALID_RESPONSE
W (65447) i2c.common: GPIO 21 is not usable, maybe conflict with others
W (65447) i2c.common: GPIO 22 is not usable, maybe conflict with others
E (66447) i2c.master: I2C software timeout
W (66447) i2cdev: [0x76 at 0] I2C op failed (Try 0, Handle 0x3ffaffc8): 264 (ESP_ERR_INVALID_RESPONSE).
W (66487) i2cdev: [0x76 at 0] Retrying operation...
W (66487) i2c.common: GPIO 21 is not usable, maybe conflict with others
W (66487) i2c.common: GPIO 22 is not usable, maybe conflict with others
W (67327) i2cdev: [0x76 at 0] I2C op failed (Try 1, Handle 0x3ffaffc8): 264 (ESP_ERR_INVALID_RESPONSE).
W (67407) i2cdev: [0x76 at 0] Retrying operation...
W (67587) bme680: Gas data is not valid
I (67587) bme680-demo: Temp: 33.83 C Humidity: 100.00 % Pressure: 657.77 hPa Gas: 0 ohm
W (70767) bme680: Gas data is not valid
I (70767) bme680-demo: Temp: 33.83 C Humidity: 100.00 % Pressure: 657.77 hPa Gas: 0 ohm
W (73767) i2c.common: GPIO 21 is not usable, maybe conflict with others
W (73767) i2c.common: GPIO 22 is not usable, maybe conflict with others
E (73767) i2c.master: I2C hardware timeout detected
W (73767) i2cdev: [0x76 at 0] I2C op failed (Try 0, Handle 0x3ffaffc8): 264 (ESP_ERR_INVALID_RESPONSE).
W (73817) i2cdev: [0x76 at 0] Retrying operation...
W (73817) i2c.common: GPIO 21 is not usable, maybe conflict with others
W (73817) i2c.common: GPIO 22 is not usable, maybe conflict with others
W (73827) i2c.common: GPIO 21 is not usable, maybe conflict with others
W (73827) i2c.common: GPIO 22 is not usable, maybe conflict with others
E (73827) i2c.master: I2C hardware timeout detected
W (73837) i2cdev: [0x76 at 0] I2C op failed (Try 1, Handle 0x3ffaffc8): 264 (ESP_ERR_INVALID_RESPONSE).
W (73927) i2cdev: [0x76 at 0] Retrying operation...
W (73927) i2c.common: GPIO 21 is not usable, maybe conflict with others
W (73927) i2c.common: GPIO 22 is not usable, maybe conflict with others
W (73927) i2c.common: GPIO 21 is not usable, maybe conflict with others
W (73937) i2c.common: GPIO 22 is not usable, maybe conflict with others
E (73937) i2c.master: I2C hardware timeout detected
W (73947) i2cdev: [0x76 at 0] I2C op failed (Try 2, Handle 0x3ffaffc8): 264 (ESP_ERR_INVALID_RESPONSE).
W (74117) i2cdev: [0x76 at 0] Retrying operation...
W (74117) i2c.common: GPIO 21 is not usable, maybe conflict with others
W (74117) i2c.common: GPIO 22 is not usable, maybe conflict with others
W (74207) i2c.common: GPIO 21 is not usable, maybe conflict with others
W (74207) i2c.common: GPIO 22 is not usable, maybe conflict with others
E (74207) i2c.master: I2C hardware timeout detected
W (74217) i2cdev: [0x76 at 0] I2C op failed (Try 3, Handle 0x3ffaffc8): 264 (ESP_ERR_INVALID_RESPONSE).
E (74227) i2cdev: [0x76 at 0] I2C operation failed after 4 retries. Last error: 264 (ESP_ERR_INVALID_RESPONSE)
E (74237) bme680: Could not set forced mode to start TPHG measurement cycle
E (74237) bme680-demo: BME680 read failed: ESP_ERR_INVALID_RESPONSE
W (77247) i2c.common: GPIO 21 is not usable, maybe conflict with others
W (77247) i2c.common: GPIO 22 is not usable, maybe conflict with others
W (77427) bme680: Gas data is not valid
I (77427) bme680-demo: Temp: 33.83 C Humidity: 100.00 % Pressure: 657.77 hPa Gas: 0 ohm
W (80607) bme680: Gas data is not valid
I (80607) bme680-demo: Temp: 33.83 C Humidity: 100.00 % Pressure: 657.77 hPa Gas: 0 ohm
W (83787) bme680: Gas data is not valid
I (83787) bme680-demo: Temp: 33.83 C Humidity: 100.00 % Pressure: 657.77 hPa Gas: 0 ohm
W (86967) bme680: Gas data is not valid
I (86967) bme680-demo: Temp: 33.83 C Humidity: 100.00 % Pressure: 657.77 hPa Gas: 0 ohm
66) boot: Loaded app from partition at offset 0x10000
I (166) boot: Disabling RNG early entropy sourc<72>ets Jul 29 2019 12:21:46
rst:0x1 (POWERON_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DIO, clock div:2
load:0x3fff0040,len:6292
load:0x40078000,len:15684
load:0x40080400,len:3904
entry 0x4008061c
I (27) boot: ESP-IDF v6.1-dev-5769-gfb14a3e7f4 2nd stage bootloader
I (27) boot: compile time Jun 23 2026 23:00:54
I (28) boot: Multicore bootloader
I (30) boot: chip revision: v3.1
I (33) boot.esp32: SPI Speed : 40MHz
I (37) boot.esp32: SPI Mode : DIO
I (40) boot.esp32: SPI Flash Size : 4MB
I (44) boot: Enabling RNG early entropy source...
I (49) boot: Partition Table:
I (51) boot: ## Label Usage Type ST Offset Length
I (57) boot: 0 nvs WiFi data 01 02 00009000 00006000
I (64) boot: 1 phy_init RF data 01 01 0000f000 00001000
I (71) boot: 2 factory factory app 00 00 00010000 00100000
I (77) boot: End of partition table
I (80) esp_image: segment 0: paddr=00010020 vaddr=3f400020 size=0b26ch ( 45676) map
I (105) esp_image: segment 1: paddr=0001b294 vaddr=3ffb0000 size=02ba8h ( 11176) load
I (110) esp_image: segment 2: paddr=0001de44 vaddr=40080000 size=021d4h ( 8660) load
I (114) esp_image: segment 3: paddr=00020020 vaddr=400d0020 size=12578h ( 75128) map
I (144) esp_image: segment 4: paddr=000325a0 vaddr=400821d4 size=08f40h ( 36672) load
I (160) esp_image: segment 5: paddr=0003b4e8 vaddr=50000000 size=00028h ( 40) load
I (166) boot: Loaded app from partition at offset 0x10000
I (166) boot: Disabling RNG early entropy source...
I (178) cpu_start: Multicore app
I (186) cpu_start: GPIO 3 and 1 are used as console UART I/O pins
I (187) cpu_start: Pro cpu start user code
I (187) cpu_start: cpu freq: 160000000 Hz
I (189) app_init: Application information:
I (192) app_init: Project name: bme680-demo
I (197) app_init: App version: 1
I (200) app_init: Compile time: Jun 23 2026 23:00:20
I (205) app_init: ELF file SHA256: cf6ca9352...
I (209) app_init: ESP-IDF: v6.1-dev-5769-gfb14a3e7f4
I (215) efuse_init: Min chip rev: v0.0
I (219) efuse_init: Max chip rev: v3.99
I (223) efuse_init: Chip rev: v3.1
I (227) heap_init: Initializing. RAM available for dynamic allocation:
I (233) heap_init: At 3FFAE6E0 len 00001920 (6 KiB): DRAM
I (238) heap_init: At 3FFB36B0 len 0002C950 (178 KiB): DRAM
I (243) heap_init: At 3FFE0440 len 00003AE0 (14 KiB): D/IRAM
I (249) heap_init: At 3FFE4350 len 0001BCB0 (111 KiB): D/IRAM
I (254) heap_init: At 4008B114 len 00014EEC (83 KiB): IRAM
I (261) spi_flash: detected chip: generic
I (263) spi_flash: flash io: dio
I (267) main_task: Started on CPU0
I (267) main_task: Calling app_main()
I (267) i2cdev: [Port 0] First initialization. Configuring bus with SDA=21, SCL=22 (Pullups SCL:0 SDA:0)
I (277) i2cdev: [Port 0] Successfully installed I2C master bus (Handle: 0x3ffb566c).
I (287) i2cdev: [0x76 at 0] Device added successfully (Device Handle: 0x3ffaffc8, Speed: 100000 Hz).
W (297) i2c.common: GPIO 21 is not usable, maybe conflict with others
W (297) i2c.common: GPIO 22 is not usable, maybe conflict with others
E (1307) i2c.master: I2C software timeout
W (1307) i2cdev: [0x76 at 0] I2C op failed (Try 0, Handle 0x3ffaffc8): 264 (ESP_ERR_INVALID_RESPONSE).
W (1347) i2cdev: [0x76 at 0] Retrying operation...
W (1347) i2c.common: GPIO 21 is not usable, maybe conflict with others
W (1347) i2c.common: GPIO 22 is not usable, maybe conflict with others
E (2347) i2c.master: I2C software timeout
W (2347) i2cdev: [0x76 at 0] I2C op failed (Try 1, Handle 0x3ffaffc8): 264 (ESP_ERR_INVALID_RESPONSE).
W (2427) i2cdev: [0x76 at 0] Retrying operation...
W (2427) i2c.common: GPIO 21 is not usable, maybe conflict with others
W (2427) i2c.common: GPIO 22 is not usable, maybe conflict with others
E (3427) i2c.master: I2C software timeout
W (3427) i2cdev: [0x76 at 0] I2C op failed (Try 2, Handle 0x3ffaffc8): 264 (ESP_ERR_INVALID_RESPONSE).
W (3587) i2cdev: [0x76 at 0] Retrying operation...
W (3587) i2c.common: GPIO 21 is not usable, maybe conflict with others
W (3587) i2c.common: GPIO 22 is not usable, maybe conflict with others
E (4587) i2c.master: I2C software timeout
W (4587) i2cdev: [0x76 at 0] I2C op failed (Try 3, Handle 0x3ffaffc8): 264 (ESP_ERR_INVALID_RESPONSE).
E (4587) i2cdev: [0x76 at 0] I2C operation failed after 4 retries. Last error: 264 (ESP_ERR_INVALID_RESPONSE)
E (4597) bme680-demo: BME680 init failed on SDA=21 SCL=22 addr=0x76: ESP_ERR_INVALID_RESPONSE. Retrying in 2000 ms
I (6607) i2cdev: [0x76 at 0] Device added successfully (Device Handle: 0x3ffaffc8, Speed: 100000 Hz).
W (6607) i2c.common: GPIO 21 is not usable, maybe conflict with others
W (6607) i2c.common: GPIO 22 is not usable, maybe conflict with others
I (6637) bme680-demo: Sensor initialized on I2C port 0, SDA=21, SCL=22, address=0x76
W (6817) bme680: Heater is not stable
I (6817) bme680-demo: Temp: 33.48 C Humidity: 56.71 % Pressure: 1014.18 hPa Gas: 0 ohm
I (9997) bme680-demo: Temp: 33.50 C Humidity: 57.12 % Pressure: 1014.20 hPa Gas: 5412 ohm
I (13177) bme680-demo: Temp: 33.53 C Humidity: 57.65 % Pressure: 1014.20 hPa Gas: 6300 ohm
I (16357) bme680-demo: Temp: 33.54 C Humidity: 55.33 % Pressure: 1014.20 hPa Gas: 7493 ohm
I (19537) bme680-demo: Temp: 33.56 C Humidity: 52.27 % Pressure: 1014.20 hPa Gas: 8784 ohm
I (22717) bme680-demo: Temp: 33.58 C Humidity: 50.32 % Pressure: 1014.20 hPa Gas: 10081 ohm
I (25897) bme680-demo: Temp: 33.59 C Humidity: 49.17 % Pressure: 1014.24 hPa Gas: 11230 ohm
I (29077) bme680-demo: Temp: 33.61 C Humidity: 49.93 % Pressure: 1014.24 hPa Gas: 12462 ohm
I (32257) bme680-demo: Temp: 33.63 C Humidity: 49.71 % Pressure: 1014.24 hPa Gas: 13875 ohm
I (35437) bme680-demo: Temp: 33.64 C Humidity: 48.52 % Pressure: 1014.24 hPa Gas: 15260 ohm
W (38437) i2c.common: GPIO 21 is not usable, maybe conflict with others
W (38437) i2c.common: GPIO 22 is not usable, maybe conflict with others
E (38437) i2c.master: I2C hardware timeout detected
W (38437) i2cdev: [0x76 at 0] I2C op failed (Try 0, Handle 0x3ffaffc8): 264 (ESP_ERR_INVALID_RESPONSE).
W (38487) i2cdev: [0x76 at 0] Retrying operation...
W (38487) i2c.common: GPIO 21 is not usable, maybe conflict with others
W (38487) i2c.common: GPIO 22 is not usable, maybe conflict with others
W (38767) i2c.common: GPIO 21 is not usable, maybe conflict with others
W (38767) i2c.common: GPIO 22 is not usable, maybe conflict with others
E (38767) i2c.master: I2C hardware timeout detected
W (38767) i2cdev: [0x76 at 0] I2C op failed (Try 1, Handle 0x3ffaffc8): 264 (ESP_ERR_INVALID_RESPONSE).
W (38857) i2cdev: [0x76 at 0] Retrying operation...
W (38857) i2c.common: GPIO 21 is not usable, maybe conflict with others
W (38857) i2c.common: GPIO 22 is not usable, maybe conflict with others
W (38857) i2c.common: GPIO 21 is not usable, maybe conflict with others
W (38867) i2c.common: GPIO 22 is not usable, maybe conflict with others
E (38867) i2c.master: I2C hardware timeout detected
W (38877) i2cdev: [0x76 at 0] I2C op failed (Try 2, Handle 0x3ffaffc8): 264 (ESP_ERR_INVALID_RESPONSE).
W (39047) i2cdev: [0x76 at 0] Retrying operation...
W (39047) i2c.common: GPIO 21 is not usable, maybe conflict with others
W (39047) i2c.common: GPIO 22 is not usable, maybe conflict with others
E (40047) i2c.master: I2C software timeout
W (40047) i2cdev: [0x76 at 0] I2C op failed (Try 3, Handle 0x3ffaffc8): 264 (ESP_ERR_INVALID_RESPONSE).
E (40047) i2cdev: [0x76 at 0] I2C operation failed after 4 retries. Last error: 264 (ESP_ERR_INVALID_RESPONSE)
E (40057) bme680: Could not set forced mode to start TPHG measurement cycle
E (40057) bme680-demo: BME680 read failed: ESP_ERR_INVALID_RESPONSE
W (43067) i2c.common: GPIO 21 is not usable, maybe conflict with others
W (43067) i2c.common: GPIO 22 is not usable, maybe conflict with others
W (43657) i2c.common: GPIO 21 is not usable, maybe conflict with others
W (43657) i2c.common: GPIO 22 is not usable, maybe conflict with others
E (43657) i2c.master: I2C hardware timeout detected
W (43667) i2cdev: [0x76 at 0] I2C op failed (Try 0, Handle 0x3ffaffc8): 264 (ESP_ERR_INVALID_RESPONSE).
W (43717) i2cdev: [0x76 at 0] Retrying operation...
W (43717) i2c.common: GPIO 21 is not usable, maybe conflict with others
W (43717) i2c.common: GPIO 22 is not usable, maybe conflict with others
W (43717) i2c.common: GPIO 21 is not usable, maybe conflict with others
W (43727) i2c.common: GPIO 22 is not usable, maybe conflict with others
E (43727) i2c.master: I2C hardware timeout detected
W (43737) i2cdev: [0x76 at 0] I2C op failed (Try 1, Handle 0x3ffaffc8): 264 (ESP_ERR_INVALID_RESPONSE).
W (43827) i2cdev: [0x76 at 0] Retrying operation...
W (43827) i2c.common: GPIO 21 is not usable, maybe conflict with others
W (43827) i2c.common: GPIO 22 is not usable, maybe conflict with others
E (44827) i2c.master: I2C software timeout
W (44827) i2cdev: [0x76 at 0] I2C op failed (Try 2, Handle 0x3ffaffc8): 264 (ESP_ERR_INVALID_RESPONSE).
W (44987) i2cdev: [0x76 at 0] Retrying operation...
W (44987) i2c.common: GPIO 21 is not usable, maybe conflict with others
W (44987) i2c.common: GPIO 22 is not usable, maybe conflict with others
W (46147) i2c.common: GPIO 21 is not usable, maybe conflict with others
W (46147) i2c.common: GPIO 22 is not usable, maybe conflict with others
E (46147) i2c.master: I2C hardware timeout detected
W (46147) i2cdev: [0x76 at 0] I2C op failed (Try 0, Handle 0x3ffaffc8): 264 (ESP_ERR_INVALID_RESPONSE).
W (46197) i2cdev: [0x76 at 0] Retrying operation...
W (46197) i2c.common: GPIO 21 is not usable, maybe conflict with others
W (46197) i2c.common: GPIO 22 is not usable, maybe conflict with others
W (46197) bme680: Gas data is not valid
I (46197) bme680-demo: Temp: 33.83 C Humidity: 100.00 % Pressure: 657.77 hPa Gas: 0 ohm
W (49387) bme680: Gas data is not valid
I (49387) bme680-demo: Temp: 33.83 C Humidity: 100.00 % Pressure: 657.77 hPa Gas: 0 ohm
W (52567) bme680: Gas data is not valid
I (52567) bme680-demo: Temp: 33.83 C Humidity: 100.00 % Pressure: 657.77 hPa Gas: 0 ohm
W (55747) bme680: Gas data is not valid
I (55747) bme680-demo: Temp: 33.83 C Humidity: 100.00 % Pressure: 657.77 hPa Gas: 0 ohm
W (58747) i2c.common: GPIO 21 is not usable, maybe conflict with others
W (58747) i2c.common: GPIO 22 is not usable, maybe conflict with others
W (59137) i2c.common: GPIO 21 is not usable, maybe conflict with others
W (59137) i2c.common: GPIO 22 is not usable, maybe conflict with others
E (59137) i2c.master: I2C hardware timeout detected
W (59147) i2cdev: [0x76 at 0] I2C op failed (Try 0, Handle 0x3ffaffc8): 264 (ESP_ERR_INVALID_RESPONSE).
W (59187) i2cdev: [0x76 at 0] Retrying operation...
W (59187) i2c.common: GPIO 21 is not usable, maybe conflict with others
W (59187) i2c.common: GPIO 22 is not usable, maybe conflict with others
E (60187) i2c.master: I2C software timeout
W (60187) i2cdev: [0x76 at 0] I2C op failed (Try 1, Handle 0x3ffaffc8): 264 (ESP_ERR_INVALID_RESPONSE).
W (60267) i2cdev: [0x76 at 0] Retrying operation...
W (60267) i2c.common: GPIO 21 is not usable, maybe conflict with others
W (60267) i2c.common: GPIO 22 is not usable, maybe conflict with others
E (61267) i2c.master: I2C software timeout
W (61267) i2cdev: [0x76 at 0] I2C op failed (Try 2, Handle 0x3ffaffc8): 264 (ESP_ERR_INVALID_RESPONSE).
W (61427) i2cdev: [0x76 at 0] Retrying operation...
W (61427) i2c.common: GPIO 21 is not usable, maybe conflict with others
W (61427) i2c.common: GPIO 22 is not usable, maybe conflict with others
E (62427) i2c.master: I2C software timeout
W (62427) i2cdev: [0x76 at 0] I2C op failed (Try 3, Handle 0x3ffaffc8): 264 (ESP_ERR_INVALID_RESPONSE).
E (62427) i2cdev: [0x76 at 0] I2C operation failed after 4 retries. Last error: 264 (ESP_ERR_INVALID_RESPONSE)
E (62437) bme680: Could not set forced mode to start TPHG measurement cycle
E (62437) bme680-demo: BME680 read failed: ESP_ERR_INVALID_RESPONSE
W (65447) i2c.common: GPIO 21 is not usable, maybe conflict with others
W (65447) i2c.common: GPIO 22 is not usable, maybe conflict with others
E (66447) i2c.master: I2C software timeout
W (66447) i2cdev: [0x76 at 0] I2C op failed (Try 0, Handle 0x3ffaffc8): 264 (ESP_ERR_INVALID_RESPONSE).
W (66487) i2cdev: [0x76 at 0] Retrying operation...
W (66487) i2c.common: GPIO 21 is not usable, maybe conflict with others
W (66487) i2c.common: GPIO 22 is not usable, maybe conflict with others
W (67327) i2cdev: [0x76 at 0] I2C op failed (Try 1, Handle 0x3ffaffc8): 264 (ESP_ERR_INVALID_RESPONSE).
W (67407) i2cdev: [0x76 at 0] Retrying operation...
W (67587) bme680: Gas data is not valid
I (67587) bme680-demo: Temp: 33.83 C Humidity: 100.00 % Pressure: 657.77 hPa Gas: 0 ohm
W (70767) bme680: Gas data is not valid
I (70767) bme680-demo: Temp: 33.83 C Humidity: 100.00 % Pressure: 657.77 hPa Gas: 0 ohm
W (73767) i2c.common: GPIO 21 is not usable, maybe conflict with others
W (73767) i2c.common: GPIO 22 is not usable, maybe conflict with others
E (73767) i2c.master: I2C hardware timeout detected
W (73767) i2cdev: [0x76 at 0] I2C op failed (Try 0, Handle 0x3ffaffc8): 264 (ESP_ERR_INVALID_RESPONSE).
W (73817) i2cdev: [0x76 at 0] Retrying operation...
W (73817) i2c.common: GPIO 21 is not usable, maybe conflict with others
W (73817) i2c.common: GPIO 22 is not usable, maybe conflict with others
W (73827) i2c.common: GPIO 21 is not usable, maybe conflict with others
W (73827) i2c.common: GPIO 22 is not usable, maybe conflict with others
E (73827) i2c.master: I2C hardware timeout detected
W (73837) i2cdev: [0x76 at 0] I2C op failed (Try 1, Handle 0x3ffaffc8): 264 (ESP_ERR_INVALID_RESPONSE).
W (73927) i2cdev: [0x76 at 0] Retrying operation...
W (73927) i2c.common: GPIO 21 is not usable, maybe conflict with others
W (73927) i2c.common: GPIO 22 is not usable, maybe conflict with others
W (73927) i2c.common: GPIO 21 is not usable, maybe conflict with others
W (73937) i2c.common: GPIO 22 is not usable, maybe conflict with others
E (73937) i2c.master: I2C hardware timeout detected
W (73947) i2cdev: [0x76 at 0] I2C op failed (Try 2, Handle 0x3ffaffc8): 264 (ESP_ERR_INVALID_RESPONSE).
W (74117) i2cdev: [0x76 at 0] Retrying operation...
W (74117) i2c.common: GPIO 21 is not usable, maybe conflict with others
W (74117) i2c.common: GPIO 22 is not usable, maybe conflict with others
W (74207) i2c.common: GPIO 21 is not usable, maybe conflict with others
W (74207) i2c.common: GPIO 22 is not usable, maybe conflict with others
E (74207) i2c.master: I2C hardware timeout detected
W (74217) i2cdev: [0x76 at 0] I2C op failed (Try 3, Handle 0x3ffaffc8): 264 (ESP_ERR_INVALID_RESPONSE).
E (74227) i2cdev: [0x76 at 0] I2C operation failed after 4 retries. Last error: 264 (ESP_ERR_INVALID_RESPONSE)
E (74237) bme680: Could not set forced mode to start TPHG measurement cycle
E (74237) bme680-demo: BME680 read failed: ESP_ERR_INVALID_RESPONSE
W (77247) i2c.common: GPIO 21 is not usable, maybe conflict with others
W (77247) i2c.common: GPIO 22 is not usable, maybe conflict with others
W (77427) bme680: Gas data is not valid
I (77427) bme680-demo: Temp: 33.83 C Humidity: 100.00 % Pressure: 657.77 hPa Gas: 0 ohm
W (80607) bme680: Gas data is not valid
I (80607) bme680-demo: Temp: 33.83 C Humidity: 100.00 % Pressure: 657.77 hPa Gas: 0 ohm
W (83787) bme680: Gas data is not valid
I (83787) bme680-demo: Temp: 33.83 C Humidity: 100.00 % Pressure: 657.77 hPa Gas: 0 ohm
W (86967) bme680: Gas data is not valid
I (86967) bme680-demo: Temp: 33.83 C Humidity: 100.00 % Pressure: 657.77 hPa Gas: 0 ohm